satin black powder overstock special

[tcpowderworks]

I got a great deal on satin black so I bought up lots. This color is perfect for brackets, mounts, pulleys etc...can also be top coated in a gloss clear for a nice deep wet look. Pricing on parts will be 50% off normal prices if done in this black until gone.

[madmike]

how about thos vette rims i told you about

[tcpowderworks]

If they are done in a solid color then yep

[madmike]

well what price

[tcpowderworks]

150

[Charlie Moua]

picture of what the finish would look like?
if so I might just have you do like 3 valve covers for me?
PM me picture and price asap.

Thanks bud. I've been waiting on a deal... lol

[tcpowderworks]

standard vc's run 75/ea, so 37.5 ea in satin,
lemme see what I can find for a color sample

[tcpowderworks]

[Charlie Moua]

all i need is the picture bud.
I might do a few covers and maybe some random brackets.

[Charlie Moua]

hum.... any better shots with it in the light/sun & with a clear coat?
I'd like the wet glossy look you were talking about.

thanks

[tcpowderworks]

The pricing is for the satin only adding a gloss clear was just mentioned as an option. The clear top coat will add 50% like usual, still much cheaper than usual. Don't have a better pic of parts with both satin and gloss top coat

[SlowEGG]

How much to do 2 intake pieces? Both 3.5" in diameter, one is a straight section about 12" long and the other has a 45 degree bend in it. And is about 22" in total length. Thanks

[tcpowderworks]

Originally Posted by SlowEGG

How much to do 2 intake pieces? Both 3.5" in diameter, one is a straight section about 12" long and the other has a 45 degree bend in it. And is about 22" in total length. Thanks

normal pricing on ic piping and intakes is 20/section, so being its have price....20 bux

[Charlie Moua]

Thanks for the fast reply.
what i have lined up for you 2 valve covers and 1 intake pipe.

questions:

for his 1/2 off discout price, does that also include valve letters being masked or slighly poslished?

I'm sure you can do caliper brackets but can you do calipers?
if so does the caliper have to be taken apart (piston removed ect)?
I'm trying to find more stuff in the garage that I want to get done while this deal is avaible... lol

[tcpowderworks]

masking or machine work to remove the coating off lettering is additional, you can save your slef some dough by sanding the raised letters after you get them back, its a little time comsuming, but the result is neat.

as for calipers, yes they normally run 40/each if you do the dissassembly, pistons seals etc.. (no special tools required), caliper and bracket normally runs 50

[Charlie Moua]

if I try to sand the raise letter off after it's coated, won't i end up chipping the edge of letters because the powdercoat is basically a solid coat?

[redlinetuning]

no charlie, take your time and you'll be fine. use a block to keep it straight.

[milliondollarnightmare]

how much for a set of 17" coated?

[tcpowderworks]

solid color satin black, 150 (normally 300)

[gsrintegra175]

hmm flat black gsr blades...

[tcpowderworks]

Originally Posted by gsrintegra175

hmm flat black gsr blades...

flat is available but at regular pricing, i only bought satin in this bulk qty therefore the offer is for satin

[redlinetuning]

satin is sexier than flat. wouldn't you wanna see a lady in satin anyway?

[Vi3tboy]

damn, I wish this was down time or winter. I really want to do my IM, VC, and IC piping. Hopefully this price is still good in the winter lol

[Boosted1.6]

yea I know I wanna get my rollcage powdercoated

[jrscteg]

Is this special still going?