GT35r TURBO coolant lines WHERE????

[94gsr]

Hey guys, I want to double check with you.

My brother have GT35r with coolant & oil cool. Running on built GSR motor.

I have a general idea of where the coolant lines should hook up to on the motor...
FOR THOSE OF YOU WHO HAD OR SEEN COOLANT HOOKED UP TO A TURBO....

Where does are they hooked to??? for "in" and "out".

Thanks a lot.

[benjamminb20]

Hey wats up. I have a water and oiled cooled setup on my gt35r. I just put a T in the coolant line going to the head and had a bung welded to the bottom of my radiator and had the line return down there.

[inspector01]

I just tap in to the line from the block to the TB. Just take that line out, run from the port on the block to one side of the turbo, then run another line back to the TB. Easiest way.

[SPANISH-RICE]

I just tap in to the line from the block to the TB. Just take that line out, run from the port on the block to one side of the turbo, then run another line back to the TB. Easiest way.

bingo^

[94gsr]

THANKS...VERY HELPFUL. DO YOU GUYS THINK I SHOULD KEEP MY


TURBONETICS T66 WITH
T4 /3" v-band
.70 ar (cold)
.86 ar (hot)
???

or put in the

GT35r with
T4 / 3" v-band
Greddy .70 ar with anti-surge(cold)
Precision .69 ar (hot)

[TurboSiR]

keep your T-66 and sell me the 35R?

[SlowEGG]

I would use the 35r and sell the t66

[Vtecstyle]

neng did you sell that gt42 ?