Jai_
05-18-2012, 08:33 PM
Well time is almost near, got a few things and curious as to how much it would cost to have you guys swap a head for me, and maybe a bit more.
I have a Skunk2 intake manifold also that will be going on,(some things need to be modded to install this, will let ya know if you don't already know) i would do it myself but would be pointless as you would have to take it back off and re-install it. I will provide an OEM head gasket, and arp studs for the job, along with a golden eagle therm intake mani gasket.This is going on a H22a1 in my bb4 prelude.
And i also noticed you guys are a auth. hondata dealer, i will need a tune after this and would like to try s300 out vs my vafc2..
Worse case, i drive in with the head on and then you guys install s300 and tune for me :)
Lemme know a quote for ::
head swap w/ intake mani installed
hondata s300
how much (roughly, i know its hard to tell)to tune (head has crower stg2 cams, tit crow retainer/springs, skunk2 adj cam gears) on a stock bottom end
I have a Skunk2 intake manifold also that will be going on,(some things need to be modded to install this, will let ya know if you don't already know) i would do it myself but would be pointless as you would have to take it back off and re-install it. I will provide an OEM head gasket, and arp studs for the job, along with a golden eagle therm intake mani gasket.This is going on a H22a1 in my bb4 prelude.
And i also noticed you guys are a auth. hondata dealer, i will need a tune after this and would like to try s300 out vs my vafc2..
Worse case, i drive in with the head on and then you guys install s300 and tune for me :)
Lemme know a quote for ::
head swap w/ intake mani installed
hondata s300
how much (roughly, i know its hard to tell)to tune (head has crower stg2 cams, tit crow retainer/springs, skunk2 adj cam gears) on a stock bottom end