Post up tucked and shaved crx bays

[04Eblue]

Post em up whether there your own or not.

I hardly ever see many in pic threads on other forums. I just recently got done shaving my crx's bay. Every hole that doesn't have to be there is welded shut and gone. Its currently in primer so not pic worthy yet.

[randY49]

Can't wait to see the finished project. I haven't seen many rex's bays shaved either.

[jay33s]

I will see if I can get one of my buddys CRX that k_rosenthal shaved for him..... There is nothing better than a nice clean engine bay

[Vtecstyle]

http://i179.photobucket.com/albums/w311/LilJohnAndthe507boys/omg2.jpg

sorta
lol
http://i179.photobucket.com/albums/w311/LilJohnAndthe507boys/Patscrxandgraffitable003.jpg

[cxjon]

I love GOLD!!!

[jay33s]

Yummy!

[TurboEF]

Who turbos a Nasty B18A? They must have spent all their money on the powder coating. FAIL.

[91_CRX]

Who turbos a Nasty B18A? They must have spent all their money on the powder coating. FAIL.

When I get the money together, I'll be turbocharging a B18a (or B18b...the differences aren't big enough to matter). My goal is good low-end torque (quick, low rev acceleration), which I will get with a Garrett GT25, which is the snail they put in the eclipse and the 240SX. A small turbo like that chokes the life out of an engine in higher revs, making more expensive VTEC engines pointless.

I'll agree though. All that powder coating makes that engine look like a brand new penny.

[04Eblue]

Vtecstyle- As I am sure you already know the first one is a 5th gen bay but none the less a internet celeb and sexy as hell. Then that first gen rex is badass If I remember from mnsc it made like 260 whp or something? Shit is badass but am really wanting to see some clean 2nd gen crx bays. I can't seem to find any shaved they are all just tucked.

[TurboEF]

268 whp on a dyno jet a believe. 2.2L GSR block with a deck riser.

[thevtecnician]

heres my b ay. its a work in progress. so far i got wire and brakelines tucked, shock towers and front rad support shaved, converted to inline fuel filter.
http://i34.photobucket.com/albums/d108/theVTECNICIAN916/100_3215.jpg


and a close up pic of my harness before i installed it
http://i34.photobucket.com/albums/d108/theVTECNICIAN916/100_3218.jpg
http://i34.photobucket.com/albums/d108/theVTECNICIAN916/100_3217.jpg

this was the hardest tuck ive done because i decided to run the wires for the alternator through the frame and around the front. i didnt want the wires for the alternator to go over the vc like most h22's

[hatchbone]

heres my b ay. its a work in progress. so far i got wire and brakelines tucked, shock towers and front rad support shaved, converted to inline fuel filter.
http://i34.photobucket.com/albums/d108/theVTECNICIAN916/100_3215.jpg


and a close up pic of my harness before i installed it
http://i34.photobucket.com/albums/d108/theVTECNICIAN916/100_3218.jpg
http://i34.photobucket.com/albums/d108/theVTECNICIAN916/100_3217.jpg

this was the hardest tuck ive done because i decided to run the wires for the alternator through the frame and around the front. i didnt want the wires for the alternator to go over the vc like most h22's i ran mine right under the driverside mount cant even see it. say you still have the valve cover?

[thevtecnician]

yeah i still have it

[aojtin]

Sorry its not a crx but its pretty much the same thing
It was already shaved and tucked. I just cleaned it up and sanded it a bunch.
brads ef sedan.
http://i89.photobucket.com/albums/k210/aojtin/Picture1-42.png

[brad]

sedan ftw!

[pat lehmann]

heres another pic of my 86. i didnt get too crazy with it because i wanted to be able to get at things fast. and i didnt shave anything on this one, that shit takes too much time. lol

http://photos-b.ak.fbcdn.net/photos-ak-sf2p/v183/73/20/63904137/n63904137_33542849_4778.jpg

[thevtecnician]

Sorry its not a crx but its pretty much the same thing
It was already shaved and tucked. I just cleaned it up and sanded it a bunch.
brads ef sedan.
http://i89.photobucket.com/albums/k210/aojtin/Picture1-42.png



you guys should flip the booster to hide the vacuum going to the manifold, and ditch the charcoal canister and it would be golden!

[aojtin]

you guys should flip the booster to hide the vacuum going to the manifold, and ditch the charcoal canister and it would be golden!

i brought up both ideas to brad. and actually stressed on the charcoal canister. but he insisted it stay....

[yangoholic]

OMFG, I Just Jizzed In My Pants!!!!!